Garmin GPSMAP 162 Sounder Owner'S Manual Download Page 15 | Manualshive

Page: 15 / 99

Garmin GPSMAP 162 Sounder Owner'S Manual Download Page 15

6

Getting Started

Power On/Screen Contrast

GPSMAP 162 Getting Started Tour

The GARMIN GPSMAP 162 is a powerful electronic navigation system that provides detailed map

coverage and convenient control of many advanced features right from the screen display. This tour is
designed to take you through the basic pages and functions of the system using the simulator mode.
Once you’re familiar with the main pages and functions of the unit, refer to the reference section for
instructions on performing speciﬁ c tasks and functions.

The Getting Started tour assumes that the receiver has been properly installed and initialized, and

you have not changed any of the default unit settings. If you have changed any settings (position
formats, units of measure, etc.), the descriptions and pictures in the tour may not match your
conﬁ guration.

To turn on the GPSMAP 162:

1. Press and hold the

POWER

key until the power tone sounds, then release the

POWER

key. The

Welcome Page will appear while the unit conducts a self-test.

2. Once the self-test is complete, press the

ENTER/MARK

key, if you agree, to acknowledge the

warning.

The Status Page will appear as the receiver begins acquiring satellites. From the Status Page or any

other page, you may also adjust the screen contrast and backlighting.

To adjust the screen contrast:

1. Press

POWER

and the Light and Contrast window will appear.

2. To decrease or increase the screen contrast, press LEFT or RIGHT on the

ARROW KEYPAD

.

3. Press the

ENTER/MARK

key to ﬁ nish.

The GPSMAP 162’s adjustable screen backlighting is controlled with the

POWER

key, and may be

adjusted at any time from any page. The backlight can cycle through off, user-deﬁ ned, and maximum
backlight levels by repeatedly pressing the

POWER

key.

To adjust the screen contrast, press LEFT or
RIGHT on the ARROW KEYPAD to move
the contrast slider.

«
...
13
14
15
16
17
...
»

Summary of Contents for GPSMAP 162 Sounder




































































































Reviews:

No comments