Garmin GPSMAP 130 Page 79 Owner'S Manual Download

Page: 79 / 132

Rino

130 Owner’s Manual

NIT

PERATION

RACKS

AGE

Using the TracBack Feature

The TracBack feature allows you to return along a

traveled path (or another Rino user’s path) without

marking any waypoints. When you are ready to return

to where you started, the Rino 130 takes you back by

following the Track Log that you left behind. You can

save a total of 20 tracks in the unit memory. The Track

Log starts recording as soon as the unit gets a satellite

location ﬁx and the Track Log feature is turned on. When

you no longer need a Track Log you can press the on-

screen

Clear

button to remove it.

If you want to keep a record of a certain track log or use

the TracBack feature, it is recommended that you clear

the Track Log before you start traveling. The percentage

of memory used by the current track log is displayed in

a window at the top of the page. After the Track Log is

Cleared, it displays zero percent.

When the display reaches 100%, the most recent track

points start to overwrite the least recent if the default

setting

Wrap When Full

remains selected on the track

log setup. To avoid losing track points you want, save the

Track Log when it approaches the 99% mark. The active

track log stores up to 10,000 points.
The Saved Track Page displays the track and it can also

be displayed on the Main Map Page as you navigate. You

may save up to 20 tracks with 250 points per track in the

unit. Saved Contact tracks count towards this total. Tracks

are marked BEGIN and END.

Summary of Contents for GPSMAP 130





































































































































Search results

Summary of Contents for GPSMAP 130

Reviews:

Related manuals for GPSMAP 130

Brands by name

Popular brands

Garmin GPSMAP 130, Owner'S Manual

Search results

Summary of Contents for GPSMAP 130

Reviews:

Related manuals for GPSMAP 130

Brands by name

Popular brands