Garmin GPS 10 Deluxe, Application Manual

Page: 29 / 52

GPS A
PPLICATIONS
>
23 Garmin Que Applications Guide
Locate Address in Garmin Que
Selected Find Item Option Menu
Matched Address “Route To It”
To create a Route to a destination using the Find
feature:
1. From the Menu tool bar, tap the Find (binoculars)
icon to display the Find Menu.
2. Choose a Find category to search for the desired
destination location. Refer to detailed instructions
for using the Find feature on page 9.
3. When you have selected a destination, place the
stylus on the listing until an options menu appears,
then either select “Details” or “Route To It”. “Route
To It” begins route calculation, while the “Details”
option allows you to view information about the
destination before tapping the “Route To It” button
at the bottom of the page.
4. Tap OK to return to the Map Page to view the route
on the map.
To create a Route to a Contact Location using the
Find Feature:
1. From the Contacts List, use the stylus to select an
entry with an address.
2. Then hold the stylus in place to display the drop-
down menu and select Locate in Garmin Que to
display the Find Address Page.
3. If the address from the Contacts List is in the map
database, the City, Number, Street and Postal Code
fields will contain the address data.
4. Tap Search to display the best matches.
5. Highlight your choice and hold the stylus in place to
display the drop-down menu.
6. Select Route To It to begin the route calculation.
You can also tap the Main Menu at the bottom of
the page with the address highlighted and select the
same option.
Or... tap the Location icon on the tool bar to begin
route calculation.
Note
: If the address from the Contacts List is not in the map
database, a “No address found” message will appear. The
address can be correct, but you may not have map data loaded
that supports the region where the address is located. For
example: If you are in the Los Angeles area and have map data
loaded to support only that region and you choose an address in
the Seattle region, without map data for that region, no match
can be achieved .
To Add a Find Feature Item to the Contacts List:
1. From the Main Menu for a Find Feature Address,
Intersection or highlighted Point of Interest, select
“Add to Contacts” and any item with an address
will be added to the Contacts
List. For addresses and
intersections, you will be
prompted to enter a name
before adding to Contacts.