Garmin GNC 355, Pilot'S Manual

Page: 264 / 290

6-12 Pilot’s Guide 190-02488-01 Rev. B
Messages
<Name> log
encountered an
error when
exporting.
Export failure. May occur
for WAAS or traffic logs.
1. Reformat the SD card
using an external
computer.
2. Re-insert the SD card in
the slot.
3. Contact dealer if the
problem persists.
<Name> log has
exported
successfully. Export to SD card
successful. May occur for
WAAS or traffic logs.
No action necessary.
Heading source
inoperative or
connection lost.
<Unit> is not receiving
heading information
from any source.
Heading up map
orientation not available.
Contact dealer for service.
Pressure altitude
source inoperative
or connection lost. <Unit> is not receiving
pressure altitude data
from any source.
For installations not
connected to a pressure
altitude source, this message
may be turned off via the
Altitude Source Input
configuration setting.
Contact dealer to update this
setting if preferred.
This option is available only
on GPS 175 and GNC 355
units with Main software
version 3.10 and later.
Press "Enable APR
Output" before
selecting APR on
autopilot.
Approach guidance is
available from the
connected
KAP 140/KFC 225
autopilot.
Before engaging approach
mode on the autopilot, tap
the
Enable APR Output key.
ADS-B Out fault.
Pressure altitude
source inoperative
or connection lost.
For GNX 375, or
GPS 175/GNC 355
configured to receive
ADS-B In data from
GTX 345:
Transponder loses
communication with the
pressure altitude source.
Contact dealer for service.
ADVISORY CONDITION CORRECTIVE ACTION