Garmin GNC 355, Pilot'S Manual

Page: 175 / 290

Navigation
190-02488-01 Rev. B Pilot’s Guide 3-73
Approaches
PAGE SPECIFIC CONTROLS
SELECT AN APPROACH
From the Home page:
1. Tap PROC > Approach .
2. Confirm the selected airport. If necessary, tap Airport and choose an airport
using the provided search options.
3. Tap Approach > Select an approach from the list.
4. Tap Transition > Select a transition.
5. Tap Runway > Select a runway.
6. Tap Preview > Review the approach diagram and sequence list.
7. Tap Load Approach . The Active FPL page opens.
8. Scroll the flight plan to view all approach waypoints.
Loading an Approach into Flight Plan
•
Always check the runway, transition, and all waypoints
•
Flight plans allow only one approach procedure at a time
•
You may load an alternate approach during a missed approach procedure
(flight plan retains all missed approaches)
•
Loading an approach when one is already present will replace the existing entry
•
Selecting an approach, transition waypoint, and runway defines the route
Load Approach: Loads approach
procedure into the active flight plan.
Activate Approach: Activates the
loaded approach procedure.
Remove Approach: Removes the
loaded approach procedure.
Channel/ID: Loads an SBAS
approach based on the specified
channel.