background image

7

GMI 10 Installation Instructions

Receive

Transmit

130311

Environmental Parameters

130312

Temperature

130313

Humidity

130314

Actual Pressure

NMEA 0183 Sentence Information

The GMI 10 can receive the following approved NMEA 0183 sentences from a NMEA 0183-compliant device:
BOD, BWC, DBT, DPT, GGA, GLL, GSA, GSV, HDG, HDM, MDA, MTW, MWD, MWV, RMB, RMC, VHW, WPL, 

and XTE.

Specifications

Physical

Dimensions:

 

W × H × D: 4 

5

/

16

 × 4 

3

/

8

 × 1 

29

/

32 

in (109 × 111 × 48 mm)

Weight:

   

9.6 oz. (272 g)

Cables:

   

NMEA 0183 data cable - 6 ft. (1.8 m)

 

 

NMEA 2000 drop cable and power cable- 6 

1

/

2

 ft. (2 m)

Temp range:

 

From 5°F to 158°F (from -15°C to 70°C)

Compass Safe Distance:

  9 

1

/

2

 in. (241 mm)

Case Material:

  Fully gasketed, high-impact plastic alloy, waterproof to IEC 529 IPX7 standards

Power

GMI 10 power usage:

 2.5 W max

NMEA 2000 Power Input:

 9–16 Vdc

NMEA 2000 Load Equivalency Number (LEN):

 6 (300 mA)

Declaration of Conformity

Hereby, Garmin, declares that this product is in compliance with the essential requirements and other 

relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, go to  

www.garmin.com/compliance

.

Software License Agreement

BY USING THE GMI 10, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE 

LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary 

executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in 

Garmin and/or its third-party providers.
You acknowledge that the Software is the property of Garmin and/or its third-party providers and is protected under the United States of America 

copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software, for which 

source code is not provided, are valuable trade secrets of Garmin and/or its third-party providers and that the Software in source code form 

remains a valuable trade secret of Garmin and/or its third-party providers. You agree not to decompile, disassemble, modify, reverse assemble, 

reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You 

agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America or the export 

control laws of any other applicable country.

Summary of Contents for GMI 10









Reviews: