background image

Appendix

GHC 10 Owner’s Manual 

19

appendix

Configuring the autopilot

NOTICE

Changes made to the configuration of the autopilot directly affect the 

behavior of the autopilot, and should be made by an authorized installer. 

Unnecessary adjustments of the autopilot configuration may render the 

autopilot inoperable.
The autopilot is configured for your boat during the installation process, and 

the main autopilot configuration settings rarely need to be adjusted. If the 

autopilot is not working correctly, contact your installer. 
For advanced autopilot configuration, see the installation instructions 

included with your autopilot.

registering Your Product

1.  Go to 

my.garmin.com

2.  Follow the on-screen instructions. 
3.  Keep the original sales receipt, or a photocopy, in a safe place.

Contacting garmin Product support

Contact Garmin Product Support if you have any questions about this 

product. 
•  In the USA, go to 

www.garmin.com/support

, or contact Garmin USA by 

phone at (913) 397.8200 or (800) 800.1020.

•  In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
•  In Europe, go to 

www.garmin.com/support

 and click 

Contact Support

 

for in-country support 

software License agreement

BY USING THE GHP 10/10V/12 AND THE GHC 10, YOU AGREE TO BE 

BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING 

SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT 

CAREFULLY.
Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the 

software embedded in this device (the “Software”) in binary executable form in the 

normal operation of the product. Title, ownership rights, and intellectual property 

rights in and to the Software remain in Garmin and/or its third-party providers.
You acknowledge that the Software is the property of Garmin and/or its third-

party providers and is protected under the United States of America copyright laws 

and international copyright treaties. You further acknowledge that the structure, 

organization, and code of the Software, for which source code is not provided, are 

valuable trade secrets of Garmin and/or its third-party providers and that the Software 

in source code form remains a valuable trade secret of Garmin and/or its third-party 

providers. You agree not to decompile, disassemble, modify, reverse assemble, 

reverse engineer, or reduce to human readable form the Software or any part thereof 

or create any derivative works based on the Software. You agree not to export or 

re-export the Software to any country in violation of the export control laws of the 

United States of America or the export control laws of any other applicable country.

Declaration of Conformity (DoC)

Hereby, Garmin, declares that this product is in compliance with the essential 

requirements and other relevant provisions of Directive 1999/5/EC. To view the full 

Declaration of Conformity, go to 

www.garmin.com/compliance

.

The GHP 10/12 and the GHC 10 are NMEA 2000

®

 certified.

Summary of Contents for GHP 10V





























Reviews: