Garmin GFC 600 Pilot'S Manual Download Page 60

Page: 60 / 78

Garmin GFC 600 Pilot’s Guide

190-01488-00 Rev. B

AFCS

BACKCOURSE MODE (BC)

Pressing the

key selects Backcourse mode. Backcourse mode captures and tracks

a localizer signal in the backcourse direction.

NOTE:

When making a backcourse approach, set the Selected Course to the

localizer front course.

The Flight Director creates roll steering commands from the Selected Course and

deviation when in Backcourse mode. If the Course Deviation Indicator (CDI) shows
greater than half scale when the

key is pressed, the mode is armed. If the CDI is

less than half scale, Backcourse mode is automatically captured.

NOTE:

When the AFCS is interfaced to a DG, Backcourse mode cannot be

armed. Set the Selected Heading on the DG to the same value as the Selected
Course when Backcourse mode is active.

GMC 605 AND GI 285 ANNUNCIATIONS

The GMC 605 and GI 285 will annunciate ‘BC’ for Backcourse mode.

GMC 605 Annunciating Backcourse Mode

GI 285 Annunciating Backcourse Mode

Summary of Contents for GFC 600















































































Search results

Summary of Contents for GFC 600

Reviews:

Garmin GFC 600, Pilot'S Manual, Page: 60 / 78

Search results

Summary of Contents for GFC 600

Reviews: