manualshive.com logo in svg

Garmin GFC 600, Pilot'S Manual, Page: 53 / 78

Share
Download
Garmin GFC 600 Pilot'S Manual Download Page 53

Garmin GFC 600 Pilot’s Guide

190-01488-00  Rev. B

45

AFCS

NAVIGATION MODES (GPS, VOR, LOC)

  NOTE:  

Availability of Navigation Modes depends on the installed navigation 

equipment capabilities and interfaces.

 NOTE:  

The selected navigation receiver must have a valid VOR or LOC 

signal or active GPS course for the Flight Director to enter Navigation Mode.

Pressing the 

NAV

 key selects Navigation mode.  Navigation mode acquires and 

tracks the selected navigation source (GPS, VOR, LOC) as provided by a GPS navigator 
or VHF Nav radio.  

When GPS is the selected navigation source the Flight Director will follow GPS Roll 

Steering commands when available.  Some older GPS navigators do not provide Roll 
Steering commands to the AFCS in which case the Flight Director creates steering 
commands using course and deviation inputs.    

When the navigation source is VOR or LOC, the Flight Director creates roll steering 

commands from the Selected Course and deviation.  Navigation mode can also be used 
to fly non-precision GPS and LOC approaches where vertical guidance is not required.

If the Course Deviation Indicator (CDI) shows greater than half scale when the 

NAV

 

key is pressed, the selected mode is armed.  

GMC 605 Annunciating GPS Navigation Mode Armed

If the CDI is less than half scale, Navigation mode is automatically captured.

Summary of Contents for GFC 600















































































Reviews:

No comments