Garmin G950 Pilot'S Manual Download Page 181

Page: 181 / 510

190-00870-02 Rev. A

Garmin G950 Pilot’s Guide for the Pilatus PC-6

169

FLIGHT MANAGEMENT

STEM

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Figure 5-37 Nearest Airport Page

Nearest Airport

Navigation Map Showing Nearest Airport

Runway Information

- Designation/Surface

- Length/Width

Nearest Airports

- ID/Type

- Bearing/Distance

COM/NAV Freq. Info.

- Identification

- Frequency

Window Selection Softkeys

Airport Information

- Facility/City/Elevation

Approaches Available

LD APR

Softkey (only

available if an approach is

highlighted)

Viewing information for a nearest airport on the PFD:

Press the

NRST

Softkey to display the Nearest Airports Window. Press the

FMS

Knob to activate the cursor.

Highlight the airport identifier with the

FMS

Knob and press the

ENT

Key to display the Airport Information

Window.

To return to the Nearest Airports Window press the

ENT

Key (with the cursor on ‘BACK’) or press the

CLR

Key. The cursor is now on the next airport in the nearest airports list. (Repeatedly pressing the

ENT

Key moves

through the airport list, alternating between the Nearest Airports Window and the Airport Information Window.)

Press the

CLR

Key or the

NRST

Softkey to close the PFD Nearest Airports Window.

Viewing information for a nearest airport on the MFD:

Turn the large

FMS

Knob to select the NRST page group.

Turn the small

FMS

Knob to select the Nearest Airports Page (it is the first page of the group, so it may already

be selected. If there are no Nearest Airports available, “NONE WITHIN 200 NM” is displayed.

Press the

APT

Softkey; or press the

FMS

Knob; or press the

MENU

Key, highlight ‘Select Airport Window’ and

press the

ENT

Key. The cursor is placed in the ‘NEAREST AIRPORTS’ Box. The first airport in the nearest airports

list is highlighted.

Turn the

FMS

Knob to highlight the desired airport. (Pressing the

ENT

Key also moves to the next airport)

Press the

FMS

Knob to remove the flashing cursor.

Summary of Contents for G950































































































































































































































































































































































































































































































































Search results

Summary of Contents for G950

Reviews:

Related manuals for G950

Brands by name

Popular brands

Garmin G950, Pilot'S Manual

Search results

Summary of Contents for G950

Reviews:

Related manuals for G950

Brands by name

Popular brands