Garmin G1000:Beechcraft Baron 58/G58, User Manual

Page: 60 / 538

190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
1-48
SYSTEM OVERVIEW
1.8 DISPLAY BACKLIGHTING
The PFD and MFD display backlighting, the PFD and MFD bezel, and the Audio Panel keys can be adjusted
manually in one of two ways:
• Using the individual dimmer bus control for the desired display, or
• Using the PFD Setup Menu and the following procedures. In normal operating mode, backlighting can only be
adjusted from the PFDs. In reversionary mode, adjustments can be made from any remaining displays.
Adjusting display backlighting:
1) Press either PFD MENU Key to display the PFD Setup Menu. ‘AUTO’ is now highlighted next to ‘PFD1 DSPL’. If
desired, turn the large
FMS
Knob to select ‘AUTO’ next to ‘MFD DSPL’ or ‘PFD2 DSPL’.
2) Turn the small FMS Knob to select ‘MANUAL’ and press the ENT Key. The intensity value is now highlighted.
3) Use the FMS Knob to enter the desired backlighting then press the ENT Key.
4) To remove the menu, press the
CLR
or
MENU
Key.
Adjusting key backlighting:
1) Press either PFD MENU Key to display the PFD Setup Menu. ‘AUTO’ is now highlighted next to ‘PFD1 DSPL’.
2) Turn the large FMS Knob to highlight ‘PFD DSPL’, ‘MFD DSPL’, or ‘PFD2 DSPL’, as desired.
3) Turn the small
FMS
Knob in the direction of the green arrowhead to display ‘PFD1 KEY’, ‘MFD KEY’, or ‘PFD2
KEY’.
4) Turn the large FMS Knob to highlight ‘AUTO’.
5) Turn the small
FMS
Knob to select ‘MANUAL’ and press the
ENT
Key. The intensity value is now highlighted.
6)
Use the FMS Knob to enter the desired backlighting and press the ENT Key.
7) To remove the menu, press the CLR or MENU Key.
Figure 1-43 PFD Setup Menu