190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
6-81
HAZARD AVOIDANCE
OPERATION
The unit must be in operating mode for traffic to be displayed. The ability to switch from standby to operating
mode on the ground is especially useful for scanning the airspace around the airport before takeoff.
Switching from standby mode to operating mode:
1)
On the Traffic Page, select the
OPERATE
Softkey or press the
MENU
Key and turn the small
FMS
knob
to select
Operating Mode.
2)
If using the FMS menu, press the
ENT
Key to place the SKY899 in the operating mode.
3)
To switch to Standby Mode from the Traffic Page, select the
STANDBY
Softkey.
System Self Test
1)
Set the range to 2/6 nm.
2)
Press the
STANDBY
Softkey.
3)
Press the
TEST
Softkey.
4)
Self test takes approximately eight seconds to complete. When completed successfully, traffic symbols are
displayed and a voice alert “Skywatch System Test Pass” is heard. If the self test fails, the system reverts to
Standby Mode and a voice alert “Skywatch System Test Fail” is heard.
Displaying traffic on the Traffic Map Page:
1)
Use the
FMS
knob to select the second rectangular page icon in the Map Page Group.
2)
Select the
OPERATE
Softkey to begin displaying traffic. OPERATING is displayed in the Traffic mode field.
3)
Select the
ALT MODE
Softkey to change the altitude volume.
4)
Select the
STANDBY
Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic
mode field.
5)
Turn the
RANGE
Knob clockwise to display a larger area or counter-clockwise to display a smaller area.
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
