34
There are two ways to create a route:
1.
Use existing waypoints that reside in the eTrex
Summit. Choose ‘ROUTE’ on the Menu Page, then
add a waypoint into the route from a list of available
waypoints.
2. Plan a ‘ROUTE’ in MapSource on a PC, and upload
the ‘ROUTE’ to the eTrex Summit. See your GARMIN
dealer for more information on using MapSource
(Map Source is an optional accessory, and is not
included with the eTrex Summit).
In either case, you can navigate to a destination using
‘ROUTE’ if a route has more than two waypoints. The
eTrex Summit will not allow the ‘FOLLOW’ button to be
highlighted if there is only one waypoint in the route.
When you select the ‘FOLLOW’ button, a list with two
items is displayed letting you choose where to go. The list
will always show the FIRST (BEGINNING) and the LAST
(END) waypoint in the route. The eTrex Summit will
guide you to the selected final destination following each
waypoint in the route (eTrex Summit has one route).
There are two ways to insert a waypoint into a route. One
way is to insert the waypoint before an existing waypoint
in a route. The other way is to insert the waypoint at the
end of the waypoint list in a route.
To insert a waypoint into a route:
1. Press the
PAGE
Button and switch to the ‘MENU’
Page. Press the
UP
or
DOWN
button and highlight
‘ROUTE’. Press
ENTER
. The ‘ROUTE’ Page appears.
Press
ENTER
. The ‘ADD WAYPOINT TO ROUTE’ Page
appears.
2. Press the
UP
or
DOWN
button to select the
waypoint of your choice and press
ENTER
. The
waypoint you selected is placed in the first field on
the ‘ROUTE’ page. Repeat this process until all of
the waypoints you want are entered into the route
list. Press
PAGE
to get back to the page of your
choice.
You can insert a waypoint
before an existing waypoint
in the list or at the end of
waypoint list.
Press ‘FOLLOW’ to activate
a route.
Routes
Reference
UA-1005.036