Garmin ENDURO, Owner'S Manual & Quick Start Manual

Page: 43 / 77

1
Hold MENU .
2
Select Sensors & Accessories > Altimeter .
3
Select an option:
• To calibrate automatically from your GPS starting point,
select Auto Cal. , and select an option.
• To enter the current elevation manually, select Calibrate >
Yes .
• To enter the current elevation from the digital elevation
model, select Calibrate > Use DEM .
NOTE: Some devices require a phone connection to use
DEM for calibration.
• To enter the current elevation from your GPS starting
point, select Calibrate > Use GPS .
Barometer Settings
Hold MENU , and select Sensors & Accessories > Barometer .
Calibrate : Allows you to manually calibrate the barometer
sensor.
Plot : Sets the time scale for the chart in the barometer widget.
Storm Alert : Sets the rate of barometric pressure change that
triggers a storm alert.
Watch Mode : Sets the sensor used in watch mode. The Auto
option uses both the altimeter and barometer according to
your movement. You can use the Altimeter option when your
activity involves changes in altitude, or the Barometer option
when your activity does not involve changes in altitude.
Pressure : Sets how the device displays pressure data.
Calibrating the Barometer
Your device was already calibrated at the factory, and the
device uses automatic calibration at your GPS starting point by
default. You can manually calibrate the barometer if you know
the correct elevation or the correct sea level pressure.
1 Hold MENU .
2 Select Sensors & Accessories > Barometer > Calibrate .
3
Select an option:
• To enter the current elevation and sea level pressure
(optional), select Yes .
• To calibrate automatically from the digital elevation model,
select Use DEM .
NOTE: Some devices require a phone connection to use
DEM for calibration.
• To calibrate automatically from your GPS starting point,
select Use GPS .
Xero Laser Location Settings
Before you can customize laser location settings, you must pair
a compatible Xero device ( Pairing Your Wireless Sensors ,
page 39 ).
Hold MENU , and select Sensors & Accessories > XERO
Laser Locations > Laser Locations .
During Activity : Enables the display of laser location
information from a compatible, paired Xero device during an
activity.
Share Mode : Allows you to share laser location information
publicly or broadcast it privately.
Map Settings
You can customize how the map appears in the map app and
data screens.
Hold
MENU , and select Map .
Orientation : Sets the orientation of the map. The North Up
option shows north at the top of the screen. The Track Up
option shows your current direction of travel at the top of the
screen.
User Locations : Shows or hides saved locations on the map.
Auto Zoom : Automatically selects the zoom level for optimal
use of your map. When disabled, you must zoom in or out
manually.
Navigation Settings
You can customize the map features and appearance when
navigating to a destination.
Customizing Map Features
1
Hold MENU .
2
Select Navigation > Data Screens .
3 Select an option:
• Select
Map to turn on or off the map.
• Select Guide to turn on or off the guide screen that
displays the compass bearing or course to follow while
navigating.
• Select Elevation Plot to turn on or off the elevation plot.
• Select a screen to add, remove, or customize.
Heading Settings
You can set the behavior of the pointer that appears when
navigating.
Hold
MENU , and select Navigation > Type .
Bearing : Points in the direction of your destination.
Course : Shows your relationship to the course line leading to
the destination.
Course Pointer
The course pointer is most useful when you are navigating to
your destination in a straight line, such as when you are
navigating on water. It can help you navigate back to the course
line when you go off-course to avoid obstacles or hazards.
The course pointer indicates your relationship to the course
line leading to the destination. The course deviation indicator
(CDI) provides the indication of drift (right or left) from the
course. The dots tell you how far off course you are.
Setting Up a Heading Bug
You can set up a heading indicator to display on your data
pages while navigating. The indicator points to your target
heading.
1
Hold MENU .
2
Select Navigation > Heading Bug .
Setting Navigation Alerts
You can set alerts to help you navigate to your destination.
1
Hold MENU .
2
Select Navigation > Alerts .
3
Select an option:
• To set an alert for a specified distance from your final
destination, select Final Distance .
• To set an alert for the estimated time remaining until you
reach your final destination, select Final ETE .
• To set an alert when you stray from the course, select Off
Course .
Customizing Your Device 37