Introduction
15
5
Select a data field.
6
Select the type of data shown in the field.
Showing a Navigation Inset
You can control whether a navigation inset
appears on some chart views. The naviga-
tion inset is shown only when the boat is
navigating to a destination.
1
From a chart or 3D chart view, select
MENU
.
2
If necessary, select Chart Setup.
3
Select
Overlay Numbers
>
Navigation
Inset
>
Auto
.
4
Select N
avigation Inset Setup
.
5
Complete an action:
•
To show waypoint velocity made good
(VMG) when navigating a route with
more than one leg, select R
oute Leg
Details
>
On
.
•
To show next-turn data based on dis-
tance, select
Next Turn
>
Distance
.
•
To show next-turn data based on time,
select
Next Turn
>
Time
.
•
To indicate how the destination data
appears,select
Destination
, and select
an option.
Chart Appearance Settings
You can adjust the appearance of the differ-
ent charts and 3D chart views. Each setting
is specific to the chart or chart view being
used.
NOTE
: Not all settings apply to all charts
and 3D chart views and chartplotter models.
Some options require premium maps or con-
nected accessories.
From a chart or 3D chart view, select
MENU
>
Chart Setup
>
Chart Appearance
.
Orientation
: Sets the perspective of the
map.
Detail
: Adjusts the amount of detail shown
on the map, at different zoom levels.
Heading Line
: Shows and adjusts the head-
ing line, which is a line drawn on the map
from the bow of the boat in the direction
of travel, and sets the data source for the
heading line.
Panoptix Area
: Shows and hides the area
being scanned by the Panoptix™ trans-
ducer. The attitude and heading reference
system (AHRS) must be calibrated use
World Map
: Uses either a basic world map
or a shaded relief map on the chart.
These differences are visible only when
zoomed out too far to see the detailed
charts.
Spot Depths
: Turns on spot soundings and
sets a dangerous depth. Spot depths
that are equal to or more shallow than
the dangerous depth are indicated by red
text.
Shallow Shading
: Sets the shades from the
shoreline to the specified depth.
Depth Range Shading
: Specifies an upper
and lower depth to shade between.
Symbols
: Shows and configures the appear
-
ance of various symbols on the chart,
such as the vessel icon, navaid symbols,
land POIs, and light sectors.
Style
: Sets how the chart appears over 3D
terrain.
Hazard Colors
: Shows shallow water and
land with a color scale. Blue indicates
deep water, yellow is shallow water, and
red is very shallow water.
Safe Depth
: Sets the appearance of a safe
depth for the Mariner’s Eye 3D chart view.
NOTE
: This setting affects only the ap-
pearance of hazard colors for the Mari-
ner’s Eye 3D chart view. It does not affect
the safe water depth Auto Guidance
setting or the sonar shallow water alarm
setting.
Range Rings
: Shows and configures the
appearance of range rings, which help
you to visualize distances in some chart
views.
Lane Width
: Specifies the width of the
navigation lane, which is the magenta
line in some chart views that indicates the
course to your destination.
Setting the Heading and Course Over
Ground Lines
You can show the heading line and the
course over ground (COG) line on the chart.
COG is your direction of movement. Heading
is the direction the bow of the boat is point-
ed, when a heading sensor is connected.
1
From a chart view, select
MENU
>
Chart
Setup
>
Chart Appearance
>
Heading
