Garmin ECHOMAP 60 Series, Owner'S Manual

Page: 14 / 50

Activating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel > Activate Target .
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS
heading, and other information that is reported about a targeted
AIS vessel.
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel .
Deactivating a Target for an AIS Vessel
1
From a chart or a 3D chart view, select an AIS vessel.
2
Select AIS Vessel > Deactivate Target .
Viewing a List of AIS Threats
From a chart or 3D chart view, select MENU > Other
Vessels > AIS List .
Setting the Safe-Zone Collision Alarm
Before you can set a safe-zone collision alarm, you must have a
compatible chartplotter connected to an AIS device.
The safe-zone collision alarm is used only with AIS. The safe
zone is used for collision avoidance, and can be customized.
1 Select Settings > Alarms > AIS > AIS Alarm > On .
A message banner appears and an alarm sounds when an
AIS-activated vessel enters the safe-zone area around your
boat. The object is also labeled as dangerous on the screen.
When the alarm is off, the message banner and audible
alarm are disabled, but the object is still labeled as
dangerous on the screen.
2 Select Range .
3 Select a distance for the safe-zone radius around your
vessel.
4
Select Time To .
5
Select a time at which the alarm will sound if a target is
determined to intersect the safe zone.
For example, to be notified of a pending intersection 10
minutes before it will likely occur, set Time To to 10, and the
alarm will sound 10 minutes before the vessel intersects the
safe zone.
AIS Distress Signals
Self-contained AIS distress signal devices transmit emergency
position reports when activated. The chartplotter can receive
signals from Search and Rescue Transmitters (SART),
Emergency Position Indicating Radio Beacons (EPIRB), and
other man overboard signals. Distress signal transmissions are
different than standard AIS transmissions, so they appear
differently on the chartplotter. Instead of tracking a distress
signal transmission for collision avoidance, you track a distress
signal transmission to locate and assist a vessel or person.
Navigating to a Distress Signal Transmission
When you receive a distress signal transmission, a distress
signal alarm appears.
Select Review > Go To to begin navigation to the
transmission.
AIS Distress Signal Device Targeting Symbols
Symbol Description
AIS distress signal device transmission. Select to see more
information about the transmission and begin navigation.
Transmission lost.
Transmission test. Appears when a vessel initiates a test of
their distress signal device, and does not represent a true
emergency.
Transmission test lost.
Enabling AIS Transmission Test Alerts
To avoid a large number of test alerts and symbols in crowded
areas such as marinas, you can select to receive or ignore AIS
test messages. To test an AIS emergency device, you must
enable the chartplotter to receive test alerts.
1
Select Settings > Alarms > AIS .
2
Select an option:
• To receive or ignore Emergency Position Indicating Radio
Beacon (EPRIB) test signals, select AIS-EPIRB Test .
• To receive or ignore Man Overboard (MOB) test signals,
select AIS-MOB Test .
• To receive or ignore Search and Rescue Transponder
(SART) test signals, select AIS-SART Test .
Turning Off AIS Reception
AIS signal reception is turned on by default.
Select Settings > Other Vessels > AIS > Off .
All AIS functionality on all charts and 3D chart views is
disabled. This includes AIS vessel targeting and tracking,
collision alarms that result from AIS vessel targeting and
tracking, and the display of information about AIS vessels.
Chart and 3D Chart View Settings
NOTE: Not all settings apply to all charts and 3D chart views.
Some options require premium maps or connected accessories.
These settings apply to the charts and 3D chart views, except
Fish Eye 3D ( Fish Eye 3D Settings , page 10 ).
From a chart or a 3D chart view, select MENU.
Waypoints & Tracks : Adjusts how waypoints and tracks are
shown ( Waypoints and Tracks Settings on the Charts and
Chart Views , page 10 ).
Other Vessels : Adjusts how DSC and AIS vessels are shown
( Other Vessels Settings on the Charts and Chart Views ,
page 10 ).
Laylines : Adjusts the laylines, when in sailing mode ( Laylines
Settings , page 10 ).
Quickdraw Contours : Turns on bottom contour drawing, and
allows you to create fishing map labels ( Garmin Quickdraw
Contours Mapping , page 10 ).
Chart Setup : Adjusts the information shown on the chart
( Navigation and Fishing Chart Setup , page 8 ).
Navaids : Shows navigational aids on the Fishing chart.
Navigation and Fishing Chart Setup
NOTE: Not all settings apply to all charts and 3D chart views.
Some settings require external accessories or applicable
premium charts.
From the Navigation chart or Fishing chart, select
MENU >
Chart Setup .
Satellite Photos : Shows high-resolution satellite images on the
land or on both land and sea portions of the Navigation chart,
when certain premium maps are used ( Showing Satellite
Imagery on the Navigation Chart , page 6 ).
Water Overlay : Enables relief shading, which shows the
gradient of the bottom with shading, or sonar imagery, which
helps identify the density of the bottom. This feature is
available only with some premium maps.
Tides & Currents : Shows current station indicators and tide
station indicators on the chart ( Showing Tides and Current
Indicators , page 6 ) and enables the tides and current slider,
which sets the time for which tides and currents are reported
on the map.
Roses : Shows a compass rose around your boat, indicating
compass direction oriented to the heading of the boat. A true
wind direction or apparent wind direction indicator appears if
8 Charts and 3D Chart Views