Navigating to points of interest within a venue
NOTE: this feature may not be available in all areas or for all product models.
You can create a route to a point of interest (POI) within a larger venue, such as a store in a shopping centre or a
specific terminal in an airport.
1 Select Where To? > Search.
2 Enter the name of the venue and select .
3 Select the venue.
A list of categories for POIs within the venue appears.
4 Select a category, select a location and select Go!.
The device creates a route to the parking area or venue entrance closest to the POI. When you arrive at the
destination, a chequered flag indicates the recommended parking area. A labelled point indicates the location of
the POI within the venue.
Custom points of interest
Custom POIs are customised points on the map. They can contain alerts that let you know if you are near a
designated point or if you are travelling faster than a specified speed.
Installing POI Loader
You can create or download custom POI lists on your computer and install them on your device using POI
Loader software.
1 Go to
2 Follow the on-screen instructions.
Finding custom POIs
Before you can find custom POIs, you must load custom POIs on your device using the POI Loader software
(
Installing POI Loader, page 17
1 Select Where To? > Categories.
2 Scroll to the Other Categories section, and select a category.
Search tools
Search tools allow you to search for specific types of locations by responding to on-screen prompts.
Finding a junction
You can search for a junction between two streets, motorways, or other roads.
1 Select Where To? > Junctions.
2 Follow the on-screen instructions to enter street information.
3 Select the junction.
Finding a location using coordinates
You can find a location using latitude and longitude coordinates.
1 Select Where To? > Coordinates.
2 If necessary, select
, and change the coordinate format or datum.
3 Select Coordinates.
4 Enter the latitude and longitude coordinates, and select Done.
5 Select an option:
• To save the coordinates as a location, select Save.
• To start a route to the coordinates, select Go!.
Finding and saving locations
17
