Colorado
™
Series Owner’s Manual
c
uStomIzInG
the
c
olorado
Calibration
Calibrate the altimeter by entering information or
letting the Colorado determine the elevation and
pressure. The Colorado relies on barometric pressure
to determine elevation, and the pressure at any given
elevation can fluctuate. You must know the elevation
(from a map point or other reliable data) or the pressure
(calibrated to sea level) for your current location.
To calibrate the altimeter select
Shortcuts
>
Setup
>
Calibration
>
�ltimeter
.
1. If you know the elevation, select
Yes
and enter
the information. Select
No
if you do not know the
elevation.
2. If you know the pressure select
Yes
. Select
No
if
you do not know the pressure.
3. A “
Calibration Completed
” or “
Calibration Failed
“
message appears after calibration is completed.
Fitness Setup
To connect an optional Garmin Heart Rate Monitor or
Garmin Bike Cadence Sensor to your Colorado, select
Shortcuts
>
Setup
>
Fitness
.
Heart Rate Monitor
—to use the Colorado with a heart
rate monitor, select
On
. Select
Off
when not in use.
Search for a Heart Rate Monitor
—selecting this
automatically begins a search for a Garmin Heart
Rate Monitor and the message “Searching” appears.
A “Connected” message appears when the Colorado
connects to a Garmin Heart Rate Monitor.
Bike Cadence Sensor
—to use the Colorado with a
bike cadence sensor, select
On
. Select
Off
when not in
use.
Search for a Bike Cadence Sensor
—selecting this
automatically begins a search for a Garmin Bike
Cadence sensor and the message “Searching” appears.
A “Connected” message appears when the Colorado
connects to a Garmin Bike Cadence sensor.
NOTE:
To determine if you are connected to another
Colorado, move away from other Colorado units,
sensors, or monitors.
