BMW Motorrad Navigator III Owner’s Manual
35
A
PPENDIX
Step 3: Connect the USB Cable
Use the USB cable provided to connect the Navigator III to your
computer. Also use the USB cable when updating the Navigator III
software or loading additional maps.
To connect your Navigator III to your computer:
1. Plug the small end of the USB cable into the connector
located on the back of your Navigator III
2. Connect the larger end of the USB cable to an available
USB port on your computer.
Register Your Navigator III
http://www.garmin.com/registration/
Navigator III. By registering, you will receive notification of
software and map updates.
Updating the Software and Map Data
1. Load the USB drivers using the enclosed DVD-ROM. See
2. Connect the AC cable to the power connector on the back
of the Navigator III. Turn on the Navigator III
3. Connect the USB cable to your Navigator III and your
computer.
4. Go to
http://www.garmin.com/products/navigatorIII
Updates and Downloads
.
5. Click
Download
next to the unit software.
6. Read and agree to the terms. Click
Download
.
7. Select
Run
(or
Open
). Your software is updated.
You can also use WebUpdater to update your Navigator III
http://www.garmin.com/products/webupdater/
to
learn about WebUpdater.
Check
http://www.garmin.com/unlock/update.jsp
to see if an
update for your map software is available.
To find out the version of the maps that are loaded on your
Navigator III, open the Main menu. Touch
Settings
>
About
>
Detail Maps
. To load maps to your Navigator III, see the
MapSource Help file.