manualshive.com logo in svg

Garmin Beil 407GX, Cockpit Reference Manual

Share
Download
Garmin Beil 407GX Cockpit Reference Manual Download Page 93

Garmin G1000H

™

 Cockpit Reference Guide for the Bell 407GX

190-01254-00 Rev. B

77

Additional Features

Flight

Instruments

EICAS

Nav/Com/

XPDR/Audio

AFCS

GPS Nav

Flight

Planning

Pr

ocedur

es

Hazar

d

Avoidance

Additional

Featur

es

Abnormal

Oper

ation

Annun/

Alerts

Appendix

Index

SATELLITE TELEPHONE AND DATA LINK SERVICES (OPTIONAL)

 

NOTE:  

Separate accounts must be established to access the Iridium satellite 

network for voice and Garmin Flight Data Services for data transmission of 
maintenance reports.

Operation of these features in the cockpit is accomplished through the AUX-

TELEPHONE, AUX-TEXT MESSAGING, AUX-REPORT STATUS, and AUX-WI-FI 
SETUP Pages.

Registering the Iridium Satellite System

A subscriber account must be established for each Iridium transceiver prior to 

using the Iridium Satellite System for telephone services.  Before setting up an Iridium 
account, obtain the serial number of the Iridium Transceiver (GSR1) and the System 
ID by selecting the AUX- SYSTEM STATUS Page.  Contact Garmin Flight Data Services 
at 1-866-739-5687 in the United States or 913-397-8200, ext. 1135.

After a subscriber account has been established, the system must be registered for 

datalink features such as reporting services or GFDS World Wide Weather.  Registration 
is accomplished by entering the required access code.  This process is only performed 
when initially setting up the system for GFDS services.

Registering the system for datalink services

1) 

With the aircraft outside and having a clear view of the sky, turn the large 

FMS

 Knob on the MFD to select the AUX page group.

2) 

Turn the small 

FMS 

Knob to select the AUX-SYSTEM STATUS.  Note the 

System ID number in the AIRFRAME field.

3) 

Turn the small 

FMS 

Knob to select the AUX-REPORTS STATUS or AUX-WI-FI 

SETUP Page.

4) 

If necessary, select the 

REPORTS

 Softkey.  The AUX-REPORT STATUS Page is 

now displayed.

5) 

Press the 

MENU

 Key.  The Page Menu window is now displayed.

6) 

Select ‘Register With GFDS’ in the menu list.

7) 

Press the 

ENT

 Key.  The Garmin Flight Data Service Registration window is 

now displayed.

8) 

Enter the last four digits of the System ID number in the Access Code field.

9) 

Press the 

ENT

 Key.  REGISTER will now be highlighted.

Summary of Contents for Beil 407GX































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands