Garmin Beil 407GX Page 54 Cockpit Reference Manual Download

Page: 54 / 158

Garmin G1000H

™

Cockpit Reference Guide for the Bell 407GX

190-01254-00 Rev. B

Flight Planning

Flight

Instruments

EICAS

Nav/Com/

XPDR/Audio

AFCS

GPS Nav

Flight

Planning

ocedur

Hazar

Avoidance

Additional

Featur

Abnormal

Oper

ation

Annun/

Alerts

Appendix

Index

The cursor is now in the ‘WAYPOINT TYPE’ field. If desired, the waypoint
can be made temporary (deleted automatically when the system is turned
off). If the waypoint is to remain in the system, proceed to step 7.

Turn the large

FMS

Knob one click to the left to highlight

‘TEMPORARY’.

Press the

ENT

Key to place a check-mark in the box. Turn the large

FMS

Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.

With the cursor in the ‘WAYPOINT TYPE’ field, turn the small

FMS

Knob to

display a list of waypoint types.

Turn the small

FMS

Knob to select LAT/LON (latitude and longitude).

Press the

ENT

Key.

CREATE A USER WAYPOINT DEFINED BY RADIALS FROM OTHER WAYPOINTS

Turn the large

FMS

Knob on the MFD to select the ‘WPT’ page group.

Turn the small

FMS

Knob to select the User WPT Information Page.

Press the

NEW

Softkey. A waypoint is created at the current aircraft

position.

Enter the desired waypoint name.

Press the

ENT

Key.

Turn the large

FMS

Knob one click to the left to highlight

‘TEMPORARY’.

Press the

ENT

Key to place a check-mark in the box. Turn the large

FMS

Knob to place the cursor back in the ‘WAYPOINT TYPE’ field.

With the cursor in the ‘WAYPOINT TYPE’ field, turn the small

FMS

Knob to

display a list of waypoint types.

Turn the small

FMS

Knob to select RAD/RAD (radial/radial).

Press the

ENT

Key.

10)

The cursor moves to the ‘REFERENCE WAYPOINTS’ field. With the first

waypoint name highlighted, use the

FMS

Knobs to enter the desired

waypoint name. Waypoints may also be selected as follows:

Summary of Contents for Beil 407GX































































































































































Search results

Summary of Contents for Beil 407GX

Reviews:

Related manuals for Beil 407GX

Brands by name

Popular brands

Garmin Beil 407GX, Cockpit Reference Manual

Search results

Summary of Contents for Beil 407GX

Reviews:

Related manuals for Beil 407GX

Brands by name

Popular brands