Garmin Beil 407GX Page 7 Cockpit Reference Manual Download | Manualshive

Page: 7 / 158

background image

Garmin G1000H

™

Cockpit Reference Guide for the Bell 407GX

190-01254-00 Rev. B

Warnings, Cautions & Notes

WARNING:

Navigation and terrain separation must NOT be predicated upon

the use of the terrain avoidance feature.  The terrain avoidance feature is NOT
intended to be used as a primary reference for terrain avoidance and does
not relieve the pilot from the responsibility of being aware of surroundings
during flight.  The terrain avoidance feature is only to be used as an aid for
terrain avoidance.  Terrain data is obtained from third party sources. Garmin
is not able to independently verify the accuracy of the terrain data.

WARNING:

The displayed minimum safe altitudes (MSAs) are only advisory

in nature and should not be relied upon as the sole source of obstacle and
terrain avoidance information. Always refer to current aeronautical charts
for appropriate minimum clearance altitudes.

WARNING:

The altitude calculated by G1000H GPS receivers is geometric

height above Mean Sea Level and could vary significantly from the altitude
displayed by pressure altimeters, such as the GDC 74H Air Data Computer, or
other altimeters in the aircraft. GPS altitude should never be used for vertical
navigation. Always use pressure altitude displayed by the G1000H PFD or
other pressure altimeters in aircraft.

WARNING:

Do not use outdated database information. Databases used in

the G1000H system must be updated regularly in order to ensure that the
information remains current. Pilots using any outdated database do so entirely
at their own risk.

WARNING:

Do not use basemap (land and water data) information for

primary navigation. Basemap data is intended only to supplement other
approved navigation data sources and should be considered as an aid to
enhance situational awareness.

WARNING:

Traffic information shown on the G1000H Multi Function Display

is provided as an aid in visually acquiring traffic. Pilots must maneuver
the aircraft based only upon ATC guidance or positive visual acquisition of
conflicting traffic.

WARNING:

NEXRAD weather data is to be used for long-range planning

purposes only. Due to inherent delays in data transmission and the relative
age of the data, NEXRAD weather data should not be used for short-range
weather avoidance.

«
...
5
6
7
8
9
...
»

Summary of Contents for Beil 407GX































































































































































Reviews:

No comments

Related manuals for Beil 407GX

Brand: Garmin Pages: 2

STRATUS 2nd Generation

Brand: Appareo Pages: 24

Brand: SIFA Pages: 92

$Poly-Tex PX7024 Assembly Instructions Manual preview$

Brand: Poly-Tex Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands