Garmin Beil 407GX Page 47 Cockpit Reference Manual Download

Page: 47 / 158

Garmin G1000H

™

Cockpit Reference Guide for the Bell 407GX

190-01254-00 Rev. B

GPS Navigation

Flight

Instruments

EICAS

Nav/Com/

XPDR/Audio

AFCS

GPS Nav

Flight

Planning

ocedur

Hazar

Avoidance

Additional

Featur

Abnormal

Oper

ation

Annun/

Alerts

Appendix

Index

GPS NAVIGATION

DIRECT-TO NAVIGATION

Direct-to Navigation from the MFD

Press the

Direct-to

(

)

Key.

Enter the waypoint identifier.

Press the

ENT

Key to confirm the identifier. The ‘Activate?’ field is

highlighted.

If no altitude constraint or course is desired, press the

ENT

Key to activate.

To enter an altitude constraint, proceed to step 5.

Turn the large

FMS

Knob to place the cursor over the ‘VNV’ altitude field.

Enter the desired altitude.

Press the

ENT

Key. If the waypoint entered is an airport, the option to

select MSL or AGL is now displayed. If the waypoint is not an airport,
proceed to step 9.

Turn the small

FMS

Knob to select ‘MSL’ or ‘AGL’.

Press the

ENT

Key. The cursor is now flashing in the VNV offset distance

field.

10)

Enter the desired offset distance before (-) the waypoint.

11)

Press the

ENT

Key. The ‘Activate?’ field is highlighted.

12)

Press the

ENT

Key to activate.

Direct-to Navigation from the PFD

Press the

Direct-to

Key

(

)

Turn the large

FMS

Knob to place the cursor in the desired selection field.

Turn the small

FMS

Knob to begin selecting the desired identifier, location,

etc.

Press the

ENT

Key.

The cursor is now flashing on ‘ACTIVATE?’. If no altitude constraint or
course is desired, press the

ENT

Key to activate. To enter an altitude

constraint, proceed to step 6.

Turn the large

FMS

Knob to place the cursor over the ‘ALT’ altitude field.

Summary of Contents for Beil 407GX































































































































































Search results

Summary of Contents for Beil 407GX

Reviews:

Related manuals for Beil 407GX

Brands by name

Popular brands

Garmin Beil 407GX, Cockpit Reference Manual

Search results

Summary of Contents for Beil 407GX

Reviews:

Related manuals for Beil 407GX

Brands by name

Popular brands