Garmin Apollo SL50 User Manual Download Page 86

Page: 86 / 134

System

Information

The

System

Information

area

provides

the

following pages: Date and Time, Software and
Database Version, Display test, and Owner Info.

Date and Time

1. Press the

SYS

key. Turn the Large knob to reach

the System Information function and press

ENT

You cannot change the values in Simulator mode.
This information is provided by the satellites and
you will not usually need to change it.

System Info:

Press ENT

2. Press

SEL

to reset the date and time. The Day

value will flash.

12 MAY 97

23:24 UTC

4. Turn the

Small

knob to choose the day.

15 MAY 97

23:24 UTC

5. Turn the

Large

knob to move to the Month

value. Turn the

Small

knob to choose the month.

15 JUN 97

23:24 UTC

6. Turn the

Large

knob to move to the Year value.

Turn the

Small

knob to choose the year.

15 JUN 97

23:24 UTC

7. Turn the

Large

knob to move to the Time-Hours

value. Turn the

Small

knob to choose the hours.

15 JUN 97

20:24 UTC

System Functions

SEL

SYS

ENT

Summary of Contents for Apollo SL50







































































































































Search results

Summary of Contents for Apollo SL50

Reviews:

Related manuals for Apollo SL50

Brands by name

Popular brands

Garmin Apollo SL50, User Manual

Search results

Summary of Contents for Apollo SL50

Reviews:

Related manuals for Apollo SL50

Brands by name

Popular brands