Garmin Apollo SL50, User Manual

Page: 120 / 134

Problem Possible Cause Action
Unit does not
power on Open in power
supply circuit Check circuit
breaker - reset if
necessary
Faulty electrical
wiring or
connection Contact your
dealer to perform
electrical system
test
No GPS signal
reception Obstructed signal
path Move aircraft out
of hangar or away
from buildings to
provide an
unobstructed view
of the sky for the
antenna
Incorrect seed
position, time, or
UTC differential
entered Check these
settings, if
necessary
If using a wrong
antenna: faulty
external antenna,
wiring, or
connections Contact your
dealer to check the
antenna and other
wiring
Search for nearest
waypoints reveals
too few or wrong
types of waypoints Incorrect selection
of waypoint types
to show after
search Check “Airspace
Setup” function
and verify that the
desired waypoint
type to search is
“ON”
Position fix seems
inaccurate Wrong seed
position Re-enter seed
position
Waypoints
sequencing is
erratic Direct-To entry
option setting may
not be correct If you are flying
Direct-To, the
option should be
set to “May Clear”,
see page 74
Wrong bearing
and track values Incorrect magnetic
variation entered Check Magnetic
Var option - select
“Automatic” or
enter correct value
Can’t change
active frequency Comm Radio not
communicating Contact dealer.
110
Troubleshooting