Garmin Apollo SL50, User Manual

Page: 15 / 134

WPT (Waypoint) - SL50
The Waypoint key allows access to the waypoint
database. (SL60 accesses the database from within
the System function - see page 39.)
NAV (Navigation)
Press the NAV key to reach the navigation
functions.
SYS (System Mode)
Press the
SYS
key to reach the System mode
functions. System mode is used to make system
level adjustments, setup flight plans, access the
database, and modify Nav function displays.
MSG (Message)
Press the
MSG
key to reach the Message functions.
The MSG annunciator will flash when a new
message is provided. In the SL60, pressing
MSG
twice will start the Nearest Waypoint mode just as
pressing
NRST
will on the SL50.
DIRECT-TO
The
DIRECT-TO
key is used to define a direct
course from your present position to a waypoint.
INFO (Information)
The Info function accesses supplementary
information about a waypoint.
SEL (Select)
The
SELECT
key activates editing or the selection
of options. Editing is active on the items that flash
on the display.
In the SL60 when the COM function is active,
pressing the
SEL key will recall stored frequencies.
ENT (Enter)
The ENT key enters and saves the information
flashing on the display. If the
ENT
key is not
pressed after editing, any changes made are not
saved.
In the SL60 when the COM function is active,
pressing the
ENT
key will save the standby
frequency into the Auto Stack list.
5
Introduction
SEL
ENT
INFO
D
NAV
SYS
MSG
WPT