AMPS Rugged Mount Instructions
attaching an aMPS Base Plate to the Mount
The AMPS mount is not included with the rugged mount.
1. Thread the screws
➊
through the washers
➋
, mount
➌
, and AMPS mount base
plate
➍
(not included).
➊
➋
➌
➍
➎
2. Tighten the nuts
➎
to secure the base plate.
The recommended torque is 15–20 lbf-in (1.7 to 2.25 Nm).
installing Your Montana in the Mount
notice
Before placing the device in the mount, ensure that the metal contacts on the
device and the mount are dry to avoid equipment damage. Use the weather cap to
keep the mount cradle dry.
