Garmin 190-00864-01, Quick Start Manual

Page: 15 / 24

Fishfinder 300C Quick Start Manual 3
Water Temp —sets an alarm to
sound when the transducer reports a
temperature that is 2°F (1.1°C) above
or below the specified temperature.
If you select On , press up or down
on the ROCKER to select the
temperature, then press SELECT .
Battery —sets an alarm to sound when
the battery reaches a user-determined
minimum voltage. If you select On ,
press up or down on the ROCKER to
select the minimum battery voltage,
then press SELECT .
Drift —sets an alarm to sound when
the depth changes by the value
specified. If you select On , press up
or down on the ROCKER to select the
change in drift, then press SELECT .
Display
To adjust the backlight or switch
between day and night modes:
From the Home screen, select Configure
> Display .
Backlight —press left or right on the
ROCKER .
•
•
•
•
Day/Night Mode —press down on the
ROCKER to highlight the Day/Night
bar. Press left or right on the ROCKER
to switch between day and night
mode.
Sonar
To change the sonar settings:
From the Home screen, select Configure
> Sonar . Change the sonar settings as
described starting on page 6 .
System
To change the system settings:
From the Home screen, select Configure
> System .
Beeper —sets beeps to sound during
alarms ( page 1 2 ) or when keys are
pressed. Select Off , Alarms Only , or
On (Keys & Alarms) .
Simulator —allows you to practice with
or without a transducer.
NMEA Output —allows the Fishfinder
300C to transmit information to other
NMEA 0183-compatible electronic
equipment.
•
•
•
•