Garmin 182/182C Owner'S Manual Download

Page: 119 / 126

GPSMAP 182/182C Owner’s Manual

113

PPENDIX

FCC C

OMPLIANCE

The Garmin GPSMAP 182/182C has no user-serviceable parts. Should you

ever encounter a problem with your unit, please take it to an authorized

Garmin dealer for repairs.
The GPSMAP 182/182C is fastened shut with screws. Any attempt to open

the case to change or modify the unit in any way will void your warranty and

may result in permanent damage to the equipment.

FCC Compliance

The GPSMAP 182/182C complies with Part 15 of the FCC

interference limits for Class B digital devices FOR HOME

OR OFFICE USE. These limits are designed to provide more

reasonable protection against harmful interference in a residential

installation, and are more stringent than “outdoor” requirements.
Operation of this device is subject to the following conditions: (1)

This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that

may cause undesired operation.
This equipment generates, uses, and can radiate radio

frequency energy and may cause harmful interference to radio

communications if not installed and used in accordance with the

instructions. However, there is no guarantee that interference will

not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

The GPSMAP 182/182C does not contain any user-serviceable

parts. Repairs should only be made by an authorized Garmin

service center. Unauthorized repairs or modiﬁcations could result in

permanent damage to the equipment, and void your warranty and

your authority to operate this device under Part 15 regulations.

Summary of Contents for 182/182C































































































































Search results

Summary of Contents for 182/182C

Reviews:

Related manuals for 182/182C

Brands by name

Popular brands

Garmin 182/182C, Owner'S Manual

Search results

Summary of Contents for 182/182C

Reviews:

Related manuals for 182/182C

Brands by name

Popular brands