Garmin 182/182C, Owner'S Manual

Page: 81 / 126

GPSMAP 182/182C Owner’s Manual 75
M
AIN
M
ENU
> C
OMM
T
AB
To restore the Serial Data Format settings back to the
default Garmin Data Transfer:
From the Comm tab, press MENU , highlight Defaults , and
press ENTER .
If Garmin DGPS or RTCM In/NMEA Out format is selected,
additional fields are provided to control a Garmin differential
beacon receiver directly from your GPSMAP 182/182C. The
unit can automatically scan for the DGPS beacon signal, or you
can enter the beacon frequency and bit rate on the unit and the
information is used to tune the beacon receiver.
To have the unit automatically scan for a frequency:
1. With the unit set to Garmin DGPS or RTCM In/NMEA Out ,
use the ROCKER to highlight the Beacon field, and press
ENTER .
2. Highlight Scan , and press ENTER . The numbers in the
Frequency field change as the unit scans from 284 kHz to
325 kHz, 200 bit rate, then 100 at 6-second intervals.
Status Field
SNR and
Distance shows
data when signal
is received.
NOTE: The DGPS beacon transmitters are operated by
the U.S. Coast Guard (or similar government agency in
other countries), and are responsible for their accuracy and
maintenance. For DGPS transmitter problems or to find the
most updated list of frequencies and coverage areas, contact
your local USCG, or see their Web site at
http://www.uscg.mil/.
To restart the scan:
Press MENU , highlight Restart Scan , and press ENTER .