Garland SET 652 VE, Instruction Manual

Page: 37 / 124

English English
37/124
8. TROUBLESHOOTING
Depending on the symptons of the machine, we can detect the probable cause of the problem and solve the
problem:
PROBLEM CAUSE ACTION
The engine stops when started
Not connected to the mains Connect to the mains
Cable damaged
Send machine to after sales service. Do
not repair cable with insulating tape
Switch damaged Send machine to after sales service
Brushes worn out Send machine to after sales service
The blades move slowly, making a
lot of noise and the blades heat up
The blades are dry Oil the blades
The blades are bent Send machine to after sales service
Cutting tooth or teeth damaged Send machine to after sales service
Cuchilla demasiado apretada o suelta Tighten the nuts
In case of not solving the problem, take the machine to your nearest service dealer.
To locate your nearest after sales dealer, contact the shop where you bought the machine from.