background image

14

8. Alarm Nuisance and HUSH

This alarm is designed to minimise nuisance alarms. Cigarette smoke 
will not normally cause the unit to alarm, unless the smoke is blown 
directly into the alarm. Combustion particles from cooking may set 
off the alarm if it is located too close to a cooking appliance. Large 
quantities of combustible particles are generated from spills or when 
broiling. Using the fan on a range hood which vents to the outside 
(non-recirculating type) will also help prevent nuisance alarms from 
occurring by removing these combustible products from the kitchen.

HUSH

If you know why the alarm is sounding, and you can verify that it 
is not a life threatening situation, you can push the button on the 
initiating unit (Red LED flashing every second) to silence the alarm 
for up to 10 minutes. If the smoke is not too dense, that unit, and all 
interconnected units will silence. After the Hush period, the smoke 
alarm will automatically reset and sound the alarm if particles of 
combustion are still present. You can use Hush repeatedly until the air 
has been cleared of the condition causing the alarm.

Note: Dense smoke will override Hush and sound a continuous 
alarm. If no fire is present, check to see if one of the reasons 
listed in Section 4. LOCATIONS TO AVOID may have caused 
the alarm. If a fire is discovered, get out and call the fire 
department.

•  Pushing the button on the initiating smoke alarm will silence that 

alarm and all compatible interconnected units.

•  Pushing the button on any hard-wire smoke alarm will do nothing 

to silence an interconnected smoke alarm.

Summary of Contents for Ongard OG20























Reviews: