![background image](http://html1.mh-extra.com/html/garland/moisture/moisture_installation-and-operation-manual_3742842016.webp)
Part # 1936601 Rev. 6 (01/08)
Page 16
High Fan
Pressing this key once will change the fan mode to high
speed. The LED will light as a visual indicator that the fan is
operating at high speed.
Low Fan
Pressing this key once will change the fan mode to low speed.
The LED will light as a visual indicator that the fan is operating
at low speed.
Pulse Fan
Pressing this key once will change the fan mode to pulse. The
LED will light as a visual indicator that the fan is operating in
pulse mode.
In Pulse mode, the fan operates at low speed and is turned
on and off at 30 second intervals after the programmed
temperature is reached.
Note: during pulse mode, the fan will be on continuously
during initial start-up. After the oven has reached the
programmed temperature, the fan will begin to pulse on and
off. While the fan is pulsing, the heat will only be active while
the fan is on. If the temperature probe calls for heat while the
fan is off, the control will not activate the heat output until the
fan turns on. Moisture can not be injected manually during
operation in Pulse Mode.
Cool Down
At any time the oven temperature is above 150°F, the oven
can be cooled by pressing this button. The heat will turn off,
the fan will switch to high speed and the display will change
to indicate that the oven is in Cool Down mode.
When the oven is shut off for the day by pressing the On/Off
key, if the cavity temperature is above 200°F, Cool Down will
automatically start. The fan will run at the high speed setting.
The display will indicate “Auto Cool Down.” This cools the oven
to 150°F to help extend the motor life.
Cook/Hold
Pressing this key activates the Hold feature. At the end
of the cooking cycle, the oven will continue to idle at the
programmed HOLD temperature, holding the oven’s contents
at the desired temperature until serving.
Start/Cancel
Pressing this key begins or ends a cook cycle. When in the idle
mode, pressing the key once will activate the timer to the last
programmed time period. The display timer will count down
the time remaining.
At the end of the cook cycle, an audible alarm will sound.
Pressing this key once will cancel the alarm.
To cancel a cooking cycle in progress, press and hold the key
for three seconds. The timer will stop and the oven will return
to idle mode.
Program
Pressing this key enters the Program Mode. In Program Mode,
various key/display combinations allow the user to program
oven control functions and to input/assign time, temperature
and moisture parameters to recipe keys.
1. Press and hold the Program key for 3 seconds. The display
will indicate ENTER CODE. Here, a pass code must be
entered. This security feature prevents unauthorized
persons from changing recipe parameters.
2. Use the number key to enter 4 – 2 – 7 – 5. Then press the
Y/Enter key.
3. Press the N/Scroll key to select a recipe or system
programming.
Numeric Keys
Use these keys to enter numeric values when programming
the oven functions and/or recipe keys.
“N”/Scroll
During programming, the user will be required to answer
yes or no to a question asked. This key is used to input a “no”
answer. On other occasions, this key will be used to scroll
through a list of choices.
“Y”/Enter
During programming, the user will be required to answer
yes or no to a question asked. This key is used to input a “yes”
answer. On other occasions, this key will be used to enter a
selection from a list of choices.
Summary of Contents for moisture+
Page 35: ...Part 1936601 Rev 6 01 08 Page 35 ...
Page 36: ......