![background image](http://html1.mh-extra.com/html/garland/mco-gd-10m/mco-gd-10m_service-manual_3673758016.webp)
16
APPEARANCE
CAUSE
SMALL BLUE FLAME
Check for lack of gas from:
•
Clogged orifice filter
•
Clogged pilot filter
•
Low gas supply pressure
•
Pilot adjustment at minimum
LAZY YELLOW FLAME
Check for lack of air from:
•
Large orifice
•
Dirty lint screen, if used
•
Dirty primary air opening, if there is one
•
Pilot adjustment at minimum
WAVING BLUE FLAME
Check for :
•
Excessive draft at pilot locations
•
Recirculating products of combustion
NOISY LIFTING BLOWING FLAME
Check for:
•
High gas pressure
HARD SHARP FLAME
This flame is characteristic of manufactured gas
Check for:
•
High gas pressure
•
Orifice too small
SECTION 3: - A
CCESS OF
F
UNCTIONAL
C
OMPONENTS
Summary of Contents for MCO-GD-10M
Page 25: ...25 SECTION 4 COMMON WIRE DIAGRAMS...
Page 26: ...26...
Page 27: ...27...
Page 28: ...28...