![background image](http://html1.mh-extra.com/html/garland/mco-gd-10m/mco-gd-10m_service-manual_3673758019.webp)
19
2. Remove door chain assembly (NOTE: The “A” model does not come equipped with door
chain).
3. Remove flat head metal screw 1/4”-20x1/2”
from bearing retainer.
4. Push the door toward hinge and lift up. NOTE: Bottom bearing retainer will stay in place.
5. Remove the right door in the same manner.
2
3
4
1
FILE NAME
JIT03459
To Reinstall Doors onto Convection Oven
1. Reverse procedure above.
2. Close doors.
3. Reinstall the door chain.
Installing and Adjusting Door Chain
4. Make sure two links are between
sprocket and door rod, and there
should be 8 regular links plus one
master link on the forward side of
each chain.
5. Tighten up turn buckles, the right
door should close approximately ½”
before the left door.
6. Secure the turnbuckles by tightening
lock nuts.
Disassembly of the Left Door
Locking Nuts
Door Stop Bolt
8 Links
2 Links
Turnbuckles
Summary of Contents for MCO-GD-10M
Page 25: ...25 SECTION 4 COMMON WIRE DIAGRAMS...
Page 26: ...26...
Page 27: ...27...
Page 28: ...28...