Garland CM36-280, Installation & Operating Manual

Page: 6 / 16

Part # 1382669 (07/05) Page 6
DIMENSIONS AND SPECIFICATIONS, CHEESE MELTER
Model Width Depth Height
Entry Clearances: All Models
GCM 24-280 24" (610,mm) 19" (483mm) 37-1/4" (946mm)
GCM 36-280 36" (314mm) 19" (483mm) 37-1/4" (946mm) Crated Uncrated
MCM 34 34" (864mm) 19" (483mm) 37-1/4" (946mm) 24"(610mm 20"(508mm)
Note: Data applies only to North America
Operating Pressure Installation Clearances Input: Natural and Propane Orifice
Natural Propane Sides Rear
15,000 BTU/Hr (4.39 Kw) per Burner
30,000 BTU/Hr (8.79 Kw) Total
Nat #50F
6" WC (15 mbar) 11" WC (28 mbar) 6" (152mm) 6" (152mm)
Pro #57F
Model Shipping Wt. (Lbs./Kg)
GCM 34 180/82
GCM 36-280 180/82
GCM 60-280 220/100
GCM 72-280 240/109
20"
[508mm]
17-3/8"
[441mm]
31-1/4"
[794mm]
8-3/8”
[213mm]
5-13/32"
[137mm]
3-1/2"
[89mm]
15-1/2"
[394mm]
37-3/8"
[949mm]
37-3/8"
[949mm]
15-1/2"
[394mm]
3-1/2"
[89mm]
2-1/4"
[57mm]
19"
[483mm]
2"
[51mm]
34"
[864mm]
1/2"N.P.T.[13mm]
TOPGASINLET
19"
483mm]
1/2"N.P.T.
[13mm]
TOPGAS
INLET
2-1/4"
[57mm]
2"
[51mm]
24"
[610mm]
17-3/8"
[441mm]
20"
[508mm]
5-13/32
[137mm]
8-3/8"
[213mm]
21-1/4"
[540mm]
NOTE: Installation clearance reductions are applicable
only where local codes permit
Commercial cooking equipment requires an adequate
ventilation system. For additional information, refer to the
National Fire Protection Association's standard NFPA96.
Gas input ratings shown for installations up to 2000 ft.,
(610m), above sea level. Please specify altitudes over
2000 ft.
Please specify gas type when ordering.
This product is not approved for residential use