![background image](http://html1.mh-extra.com/html/garland/bulk-keeper-20v-108/bulk-keeper-20v-108_instruction-manual_3589368035.webp)
English
English
35/84
6. INSTRUCTIONS FOR
COMMISSIONING
6.1. UNPACKING AND MATERIALS LIST
This machine includes the following items that you will
find inside the box:
1. Chainsaw.
2. Sword
3. Chain.
4. Manual.
6.2. MOUNTING
6.2.1 INSTALLING THE BAR AND CHAIN
The chain of the chain saw has very sharp teeth.
Always wear protective gloves to avoid accidentally
cutting yourself
Make sure the machine is unplugged before doing
any work on this machine.
To install them, follow these steps:
1. Unscrew the bar lock nut (8) until the cover is
free
2. Place one end of the chain on top of the bar.
3. At this time, set the chain as shown in the figure
because it rotates in the direction of the arrow.
Before mounting the guide bar with the chain,
check the cutting direction of the teeth. The correct
position of the chain will have the cutting edges of the
teeth in the direction of rotation of the chain:
4. Replace the bar cover (3) making sure that the
tensioner screw (15) matches the lower hole of
the bar.
5. Screw the bar lock nut (8) back on and tighten
the tensioner (15) until the desired tension is
achieved.
6.3. BATTERY CHARGE
The supply voltage and current must comply with the
indications on the charger’s nameplate.
Before using the battery for the first time, charge it for
at least 1 hour.
Summary of Contents for BULK KEEPER 20V 108
Page 49: ...English 49 84 NOTES...
Page 75: ...Fran ais 75 84 NOTES...
Page 125: ...Italiano 125 84 NOTES...
Page 127: ...Espa ol 127 84...