![background image](http://html1.mh-extra.com/html/garland/bulk-keeper-20v-108/bulk-keeper-20v-108_instruction-manual_3589368036.webp)
English
36/84
To charge the battery, plug the charger into the mains,
the led will light up red. Put the battery in the charger,
the led will turn green and start blinking. The charger
LED will turn from flashing green to green when the
battery is fully charged. When the battery is charged,
remove it from the charger. If you leave the battery
in the charger and it is fully charged, the charger will
automatically turn off after 2 hours, the green LED
still on.
The charging time of a fully discharged battery is 2,5
hours.
If you insert the battery into the charger and the
led starts blinking red, it means that your battery is
damaged or that the battery does not correspond to
this charger.
Recharge the battery when you notice that the power
of your machine decreases. Avoid using the machine
until the battery is fully discharged.
Charge button
Battery charge indicators
Grades:
- The battery will require 2 or 3 complete charge
discharge cycles to reach its maximum energy storage
capacity.
- This battery does not have a memory effect so it is
not necessary to fully discharge it before recharging it.
- If you are not going to use the battery for a long
period of time, charge it to the maximum, store it in an
appropriate place and recharge it every 30 days.
- Follow the advice below to ensure that the charge
capacity of your battery is maintained for as long as
possible:
- Avoid fully discharging the battery. Battery life will
be longer if you recharge the battery when you notice
your machine’s power diminishing and don’t let it run
out completely.
- Always recharge the battery after using the machine.
Do not store the battery discharged or half charged.
- Always recharge the battery inside your home and
garage to preserve the battery and charger from
humidity and inclement weather.
- Recharge the battery at temperatures between 5º
and 40º C.
- Always keep the battery away from water, humid
areas, heat sources and chemical products.
6.4. INSTALL THE BATTERY
Install the battery by sliding the battery along the rails
until it clicks. This ensures that it will remain securely
connected to the machine.
To remove the battery, press the release button and
pull out the battery.
Summary of Contents for BULK KEEPER 20V 108
Page 49: ...English 49 84 NOTES...
Page 75: ...Fran ais 75 84 NOTES...
Page 125: ...Italiano 125 84 NOTES...
Page 127: ...Espa ol 127 84...