03/09/09
P/N 4523367
Page 9
9) Unscrew Pilot Bracket from Oven Floor
The bracket is held down to the oven floor using two screws. This bracket will not be
reinstalled.
Left: Pilot assembly with bracket mounted to oven floor
Right: Pilot assembly with bracket removed
10) Detach Igniter and Bracket from Pilot Assembly
Use a pair of pliers to gently detach the ignition wire from the igniter.
Slide the sheath off the wire. This sheath will be reused in the next step.
The old pilot assembly (including the original gas tube, ignition tip and thermocouple) will
not be reinstalled.
Detach igniter from original pilot assembly. The igniter will be reused with a new pilot
assembly
