Garett FIT 14, User Manual

Page: 6 / 94

PAIRING
The device in standby mode measures and analyzes data on physical activity
and sleep. The Garett Fit 14 band is equipped with an accelerometer (G-
sensor), which monitors the user's body movements and processes them
based on algorithms that allow to determine the details of sleep and physical
activity.
Note: The Garett Fit 14 band does not require a permanent connection with
the smartphone, but to fully use the functions of the device it should be paired
with the smartphone using the application. Before using the bands for the first
time, user data must be entered in the application.
Note: Each time the watch and the application are turned on, the data is
synchronized automatically (devices must be paired!).
1.Turn on Bluetooth connectivity on your phone.
3. Open the JYouPro application.
2. Make sure the band is on.
After pairing the wristband with the phone, enter user data ("Me" tab at the
bottom of the screen, then click on the icon portrait): sex, date of birth, weight,
height. It is also possible to change units of measure, weight (Me / Unit tab).
After connecting the wristband with the phone, the recording and analysis of
physical activity and sleep automatically begin. After disconnection, the band
display shows time and activity information. The data is also stored in the
memory of the band.
4. Go to the "Device" tab at the bottom of the screen, then select the "Scanning
device" option, then select the device named "S5"
6. After successful pairing, the hour on the band will update.
5. During pairing, place the armband near the telephone with which it will be
connected.
Note: The Garett Fit 14 sports band works with smartphones that support
Bluetooth 4.0. It is also compatible with Android 5.1, iOS8 (and higher).