Gared Pro-S Portable Backstop
8
8.
Position the backboard with the slots of the Quick Change bracket onto the pins of the
bracket on the main boom as shown in figure 4. Slide the board assembly completely
onto the pins and insert the Quick Change Locking Rod (item 20) through the slots and
holes in the board and boom brackets. Secure the locking rod with the Retaining clips
(item 21).
Figure 4
9.
Attach the Backboard brace yoke (item 11) to the brackets installed in step 7 using the
Clevis Pins (item 22) and Retainer Clips (item 23) as shown in figure 5.
10.
Position the backboard brace clamp (item 10) over the yoke and yoke attachment plate on
the boom as shown in figure 5. Secure the clamp with two 3/8-16 x 2-1/4” carriage bolts
and whizlock nuts.
Figure 5
Item 20
Item 21
Item 11
Item 10
Item 22
Item 23
