FGP Series Football Goal Posts
7
Preparation for installation
1.
Layout the location for the holes on the field. For the FGP401 or 402 series goals (4 ½”
diameter post), the center of the hole must be 5’-2 ¼” behind the front of the end zone
end line as shown above. For the FGP601 or 602 series goals (5 9/16” diameter posts),
the center of the hole must be 6’-2 3/4” behind the front of the end zone end line as
shown above.
2.
Dig hole as shown in Figure 1, Figure 2, or Figure 3 depending on the type of post
installation required. Figure 1 shows dimensions for a permanent mounting, Figure 2
shows dimensions for ground sleeve mounting, and Figure 3 shows dimensions for the
plate mounted goals.
FIGURE 1 (permanent) FIGURE 2 (sleeve mount)
FIGURE 3 (plate mount)
