FGP Series Football Goal Posts
14
Upright Installation
1.
On the ground, install the upright mounting
bracket, item 3, onto the upright, item 5,
2.
Insert the ½” bolt, item 9.2 with flat washers,
item 9.10, through the bracket and upright and
secure with a ½” locknut, item 9.9.
3.
Raise the upright (bracket end) to the level of
the crossbar and slide the bracket onto the
crossbar, item 2.
4.
Make sure the upright mounting bracket is
pushed onto the crossbar completely.
5.
Rotate the upright to the vertical position and
snug the two setscrews, item 9.6, in the bracket.
6.
Using a level, adjust the upright for plumb.
7.
When the upright is plumb, tighten both
setscrews securely, item 9.6 and item 9.5.
8.
Using the hole in the bracket as a guide, drill a 17/32” hole through the crossbar.
9.
Install the ½” bolt, item 9.4, with a flat washers, item 9.10, and secure with a ½” locknut,
item 9.9.
10.
Tighten the locknut securely and retighten both setscrews.
11.
Repeat the process for the other upright.
Optional Equipment
1.
Install optional pads to gooseneck post.
GSPPAD3
Protective post pad for posts up to 4 1/2” O.D.
GSPPAD4
Protective post pad for posts up to 6” O.D.
