![background image](http://html1.mh-extra.com/html/gardner-denver/wittig-sls-34/wittig-sls-34_operating-manual-and-spare-parts-list_3907692005.webp)
2.0 Safety
T-BA/ET-1250-0-GB-
10
-
11
5
2.0 Safety
2.1 Proper use
The rotary compressor, respectively the compressor
pump, is exclusively intended for the compression,
respectively the extraction of filtered air. Any other
type of use is deemed to be improper.
Proper use also includes compliance with the operat-
ing data and the maintenance specified in the operat-
ing manual.
2.2 Acceptance and monitoring
The machine as such is not subject to any general
acceptance and monitoring requirement.
Where special regulations apply at the place of use of
the rotary compressor/compressor vacuum pumps,
the operator is responsible for complying with these
regulations.
The safety at work regulations of the local health and
safety executive must be observed in any event.
2.3 Hazard symbols and signs
The following hazard symbols and signs can be used
in the operating manual:
Hazards for people! In line with the safety
at work requirements, such references
must be precisely observed. All users
must be aware of the safety notes!
ATTENTON! is used for reference to
those directives and regulations that pre-
vent damage to the machine.
Important information!
Note environmental protection regula-
tions!
2.4 Pictographs used
The following pictographs can be used on the
machine:
Danger!
Attention Electricity!
Read the operating manual carefully!
Wear hearing protection!
Hot surfaces; risk of burns!
No access without authorization!
Noise absorbing cover ventilation auto-
matically switches ON/OFF.
2.5 Safety at work
The rotary compressor/compressor vac-
uum pump is designed according to the
latest state-of-the-art and the acknowl-
edged safety regulations. Nevertheless,
hazards may arise through their use for
the life and limb of the user or of a third
party, respectively damage may occur to
the machine or other property.
•
The machine may only be used when it is in a tech-
nically perfect condition in accordance with the
intend use and in line with the safety requirements.
Any defects of relevance where safety is con-
cerned must be rectified immediately.