![background image](http://html1.mh-extra.com/html/gardner-denver/welch-crvpro-series/welch-crvpro-series_operation-manual_3727687028.webp)
Installation and Operation
24
P1700040
WARNING!
Take appropriate safety measures in case of having delivered dangerous media!
5.13 Storage
The pumps are to be stored in a low-dust, interior room within the temperature range from + 5 to +
40 °C and at a relative air humidity < 90%.
Leave the protective elements on the suction and pressure ports. Another equally good protection may
be used.
If the pump oil is contaminated and the pump is going to be stored for a prolonged period, the oil
should be changed before the pump is stored. Even if a pump is stored for a long period with oil
initially in good condition, check the oil when the pump is restarted, and change the oil if necessary.
5.14 Transport
In case the pump has been filled with oil, please note that oil could flow into the cylinder which might
break the vanes. Therefore it is highly recommended to drain all oil within the pump before transport.
Instructions:
Use the Ring on the top side of the pump to lift the pump
Make sure to only transport the pump horizontally
Check for transport damage before initiating the pump
5.15 Scrap Disposal
CAUTION!
The Rotary vane pumps must be disposed of in accordance with the 2012/19/EU
directive and the specific national regulations.
Contaminated Rotary vane pumps must be decontaminated according to the laws.