Leak detector Vakumatik IVF R34
1. General information – authorised service company
Assembly, starting up, maintenance and repair of this leak detector have to be carried out by
specialists with proven knowledge of the construction and operation of systems for handling
liquids that are hazardous to water, as well as special knowledge in leak detection systems.
Furthermore, the specialists must also have sufficient knowledge in the area of fire and
explosion protection.
2. Safety advice
Read the technical documentation completely, observe all instructions and do not
use this product in any manner other than as described. You are advised to keep
this documentation close at hand.
Check that the documentation conforms to the device model prior to carrying out
any works on the leak detector.
Important notice
Information pertaining to special operational characteristics of the device.
Warning of electric voltage
No use in applications for the storage
of flammable liquids with a flash point
< 55°
Warning, hot surface
The leak detector must not be
assembled inside an ex-zone
3. Technical specification
Connection data
Nominal voltage:
230 VAC / 50 Hz
Current consumption leak detector
(with alarm / with integrated heater):
0,5 A
Energy consumption under normal conditions about 15 kWh/year
External exterior alarm, terminal A
230 VAC / 50 Hz max. 2A
Isolated relay (optional)
max. 240 VDC – 8 A
Pump fuse (heater)
1,6 AT
General information
Sound level (buzzer)
about 75 dB (A) 1m circumference
Max. allowable ambient temperature
and media temperature
-5° C (-20°C with optional heater) up to +50°C
Storage temperature
-25°C to +60°C
Protection Type
IP30
Protection Category
I
Weight
2,1 kg
7
Summary of Contents for THOMAS ASF VAKUMATIK IVF R34
Page 2: ...Assembly instructions leak detection type Vakumatik IVF R34 Installation clearance 2 ...
Page 21: ...21 ...
Page 22: ......
Page 23: ......