![background image](http://html1.mh-extra.com/html/gardner-denver/pureair-ewd99e/pureair-ewd99e_operating-and-service-manual_3861293053.webp)
13-11-608 Page 48
SECTION 7
COUPLING
Figure 7-1 – INSTALLATION OF COUPLING CUSHIONS
DANGER
Rotating machinery can cause personal injury or death. Turn the unit
completely off, open the main disconnect, tag and lockout before servicing the
coupling.
COUPLING -
The motor and compressor are direct connected by a resilient type flexible coupling with
several individual cushions, Figure 7-1. The coupling does not require lubrication.
If maintenance on mating parts is required, reassemble coupling as follows:
Individual Cushion Design
(Figure 7-1)
1. Slide coupling halves over shaft extensions. Be sure the collar is installed on the shaft behind one
coupling body.
2. Assemble the motor on the compressor.
3. Working through the coupling guard opening, center the coupling over the gap between the shafts,
maintaining the gap as shown in Figure 7-1, between the ends of the jaws on one coupling body and
the flange on the opposite coupling body. Tighten set screws in each coupling body.
4. Insert individual cushions as shown in Figure 7-1, and slide the collar over the cushions and secure
with cap screws. Reinstall the cover plate.
DANGER
Rotating machinery can cause personal injury or death. Do not operate unit
with either the coupling guard or the collar removed. All bolts and screws must
be properly tightened.
Alignment
- The coupling is permanently aligned by the flanges on the compressor and motor.
Summary of Contents for PUREAIR EWD99E
