![background image](http://html1.mh-extra.com/html/gardner-denver/l160-110a-v2/l160-110a-v2_user-manual_3807675012.webp)
2
Safety requirements
12 / 72
America
January 2017
Safety symbol
Meaning
Application / behavior
Warning of automatic
start
In normal operation the compressor can start automati-
cally at any time. Operational readiness of the compres-
sor is indicated by the green LED on the control panel.
Do not perform any work on the compressor when the
green LED is lit.
Warning of hot surfaces Parts of the compressor become very hot when in oper-
ation (up to 235 °C / 455 °F). Risk of injury from hot sur-
faces.
Before beginning maintenance and repair work, the com-
pressor must have cooled off sufficiently.
Suffocation warning
Suffocation hazard due to insufficient ventilation and
exhaust of the compressor space.
The operator must provide sufficient ventilation and
exhaust of the compressor room.
Warning of a crushing
hazard
Warning of crush hazards on a piece of equipment
(e.g., a machine) or structural components (e.g., covers,
enclosures, guards, fences) during transport.
Working at the labeled workstations requires increased
vigilance.
Do not go beneath the
load
Do not go beneath a suspended load. The driver is not
allowed to drive the industrial truck if a person is located
beneath the load. The driver must also make sure that
no one stands or walks under the load.
The load must be transported so that it is sufficiently
clear of the ground (max. 0.5 m / 20 in above the
ground). (In Germany also refer to the law BGV D27
“Industrial trucks”). The driver is responsible for all travel
and load movements of an industrial truck.
Lifting point
Labeling of lifting points.
Only the labeled lifting points may be used for transport.
Safety valve
Opening pressure of the safety valve (for value “xx” see
the sticker on the control panel).
Check connection ter-
minals and retighten if
needed. For additional
instructions, see the
operating instructions.
Warning of loosened clamp connections. Clamping pres-
sure can fade after some time.
Check the clamps regularly according to the safety
guidelines and tighten as needed.
Chart 2-1: Safety symbol
Summary of Contents for L160 110A V2
Page 1: ...User manual Screw compressor L160 L290 V2 L160RS L290RS V2 America ZS1149274 03 January 2017...
Page 7: ...Foreword 1 January 2017 America 7 72 1 6 Rating plate Fig 1 1 Rating plate...
Page 69: ...Appendix 9 January 2017 America 69 72...
Page 70: ...9 Appendix 70 72 America January 2017...