6. Transport and installation
23
6
Tr ans por t an d i ns tall ati on
6.1
Transport
Fig. 6
DANGER
The compressor or parts of it may fall if
mistakes are made when lifting, and this will
put your life at risk. Safety devices my be
damaged if lifted incorrectliy.
•
Always observe the safety notes in
Section 4.4 of the user manual.
•
Never lift the compressor by or tie onto
its enclosure.
•
A suitable fork lift which complies with
local safety regulations must be used
when lifting the compressor.
•
The fork length of the fork lift must
correspond to the unit width (see
Section 12.5).
•
Keep the distance between (see fig. 6)
and length of the forks in mind when
transporting the compressor.
•
All loose parts or parts which can swing
freely must be safely secured before the
unit can be lifted.
•
It is strictly prohibited to stand in the
danger zone of a lifted load.
•
Ensure that the transport load approach
is performed properly (according to the
user manual of the lifting device).
Weights
The values listed below are approximate values, they
refer to a screw compressor unit including oil fill:
L15
335 kg
L18
361 kg
L22
367 kg
L15 RS
365 kg
L18 RS
381 kg
L22 RS
386 kg