Gardner Denver HD-2250, Operating And Service Manual

Page: 5 / 47

Page iv
INDEX
Charging Pump Requirement...................... 14
Covers and Guards, Danger Notice .............. 2
Crankshaft .................................................. 11
Crosshead Assembly .................................. 11
Daily Routine Maintenance ......................... 18
DANGER NOTICES, SECTION 1................. 1
DESIGN DESCRIPTION AND
SPECIFICATIONS, SECTION 2 ........... 9
Equipment Moving and Lifting ...................... 2
Flammable, Hot, cold or Corrosive Fluid
Pumping, Danger Notice....................... 5
Fluid Cylinder Installation............................ 21
Fluid End .................................................... 12
Fluid End Removal ..................................... 20
Fluid End Service ....................................... 20
Gear Train .................................................. 11
General Requirements and Safety Rules .... 20
General Specifications................................ 13
High Pressure Liquid Jetting, Blasting
and Cleaning, Danger Notice ................ 6
Hydraulic Puller, Danger Notice .................... 2
Introduction................................................... 9
Lube Pump Suction Piping Sizing and ........ 15
Lube System Pump .................................... 15
Monthly Routine Maintenance Schedule ..... 18
Performance Rating, HD-2250.................... 13
Periodic Routing Maintenance Schedule..... 18
Plunger/Packing Lubrication ....................... 16
Plunger Packing Lubrication
Recommendation Chart ...................... 19
Plungers and Packing Replacement ........... 21
Power End ..................................................10
Power End Internal Lube Sytem ..................12
Power End Lubrication System....................15
Power End Service......................................23
Preparation after Shipping and Storage.......14
PREPARATION, OPERATION AND
MAINTENANCE, SECTION 3..............14
Pressurized Pump Systems, Danger Notice ..3
Pump Design ..............................................10
Pump Mounting Instructions ........................14
Quarterly Routine Maintenance Schedule....18
Rebuilding Data...........................................33
REBUILDING DATA, RUNNING
CLEARANCES AND TORQUES,
SECTION 6 .........................................33
Repair Parts, Ordering Instructions.................i
Running Clearances – Actual ......................33
SERVICE PROCEDURES, SECTION 4 ......20
Startup and New Pump Run-In Procedure ... 16
Torque Specifications.................................. 34
TROUBLE-SHOOTING, SECTION 5 .......... 27
Valves and Seats Replacement................... 22
Valve Seat Pulling, Danger Notice ................2
Warranty ..................................................... 35
Wedge Puller, Danger Notice ........................2